Trustindex - Excellent Rating, 4.8 Stars, 192 Reviews
Order flooring more than once a year? Grosvenor+ could save you on every order. Find out more

Showing 1–24 of 1699 resultsSorted by popularity

Utility Room LVT Flooring

The utility room is the hardest-working square metre in most British houses – washing machine vibration, tumble dryer heat, wet boots, mop water, dog paws and a constant trickle of grit walked in from the back door. Luxury vinyl flooring is the right answer for almost every utility room we quote on and the spec we recommend nine times out of ten is a 0.55mm or 0.7mm wear layer in a glue-down format that runs continuously through to the adjoining kitchen or hallway.

At Grosvenor Flooring we stock the full utility-suitable LVT libraries from Amtico, Karndean, Project Floors and Invictus, plus our own GF LVT range. Browse the full utility-room collection below, or get in touch via our enquiry form, WhatsApp or phone for tailored recommendations and pricing.


Why LVT Is the Right Floor for a Utility Room

Utility rooms break floors. They have all the moisture exposure of a bathroom, all the foot traffic of a hallway, all the point-load risk of a kitchen and on top of that the vibration and heat of white goods sitting on the surface. LVT is the only mainstream floor finish that handles all four challenges in one product. It is fully waterproof, dimensionally stable through wide temperature swings, hard enough to take the weight of a fully loaded washer-dryer without indenting and quiet enough underfoot that you do not hear every washing-machine spin cycle through the house. Tile is colder, more brittle, more expensive to fit and unforgiving on dropped crockery. Engineered wood will cup the first time the dog comes in wet. Laminate swells the first time you overfill the sink. LVT does none of these things.

Wear Layer – Why We Recommend 0.55mm or 0.7mm

For a utility room we always recommend stepping up from the standard 0.3mm domestic spec. The room is small, the cost difference is tiny in absolute terms and the floor will see commercial-grade traffic per square metre. 0.55mm is the sweet spot for a typical family utility – Karndean Van Gogh and Amtico Spacia sit here. 0.7mm is the right answer if the utility doubles as a back-door boot room, dog-washing zone or a route the whole family walks through to reach the garden – Karndean Art Select, Amtico Form and Invictus Ultimus all step up to 0.7mm.

Install Format – Glue Down, Not Click

For a utility room we specify glue down LVT by default and only consider click LVT as an exception. The reason is moisture. A glue-down floor is bonded continuously to the subfloor with no expansion gaps, no air pockets and no joints for water to creep into. A floating click floor has a perimeter expansion gap that has to be sealed properly at every doorway and appliance recess – not impossible, but a maintenance risk you do not need in a wet room. Glue down also handles point loads from washing-machine feet far better than a floating raft. Loose lay is not a utility-room product.

Utility Room LVT Ranges at a Glance

Range Wear layer Best for the utility room
Karndean Knight Tile 0.3mm Budget, lighter-use utilities
Karndean Van Gogh 0.55mm Typical family utility
Amtico Spacia 0.55mm Popular mid-spec, matches a kitchen floor
Karndean Art Select 0.7mm Boot room and dog-washing zones
Amtico Form 0.7mm Herringbone and parquet utilities
Invictus Ultimus 0.7mm Commercial-level wear
Amtico Signature 1.0mm The toughest, full design library
GF LVT 0.55mm and 0.7mm Own-brand, sharp pricing, buy online

The Utility Room Ranges We Stock

Karndean Van Gogh (0.55mm) and Karndean Art Select (0.7mm) – glue down with Karndean’s transferable lifetime domestic warranty. The default premium choice for a utility that needs to match a Karndean floor in the adjoining kitchen.

Amtico Form and Amtico Signature – Form for the parquet and herringbone option at 0.7mm, Signature for the full Amtico design library at 1mm wear layer. Both glue down, both UFH-compatible.

Invictus Ultimus – heavy-spec European glue-down at 0.7mm wear layer. The right answer for a utility room that takes commercial-level wear.

Project Floors Wood Plank Collection – German contract-grade glue down. Specified by designers and architects on commercial fit-outs, equally at home in a high-end domestic utility.

GF LVT – our own-brand glue down. Premium European spec, sharp pricing, full online checkout and free samples.

Key Takeaways

  • The utility room is the hardest-working square metre in the house – a bathroom’s moisture, a hallway’s traffic, a kitchen’s point loads, plus washing-machine vibration and heat – and LVT is the only mainstream floor that handles all of it in one product.
  • Step up from the entry 0.3mm: 0.55mm is the sweet spot (Karndean Van Gogh, Amtico Spacia) and 0.7mm if the utility doubles as a boot room or dog-washing zone (Karndean Art Select, Amtico Form, Invictus Ultimus).
  • Glue-down, not click: a bonded floor has no perimeter gaps or joints for water to reach and handles washing-machine point loads far better; seal around appliance recesses and skirtings.
  • GF LVT is available to buy online; Amtico, Karndean, Invictus and Project Floors are Request a Price.

Underfloor Heating

Glue down LVT is the format underfloor heating manufacturers themselves recommend and a utility room is one of the rooms where UFH delivers the biggest comfort lift – wet socks on a cold morning are no fun. All the glue-down ranges above are compatible with both wet and electric UFH up to a maximum surface temperature of 27C. Acclimatise the boxes in the room for 48 hours before fitting and follow the manufacturer’s commissioning sequence.

Subfloor and Install Notes Specific to Utility Rooms

Three things to get right. First, the subfloor has to be flat – washing machines on a 3mm hump will walk across the floor on a fast spin. Second, run a continuous bead of silicone around the appliance recesses and behind the skirtings to keep splash water out of the floor edge. Third, where the LVT meets the kitchen or hallway, run the same product through the doorway with no threshold strip if at all possible – a continuous floor reads as a more expensive room and gives you no edge for water to find.

Continuous-Floor Story – Utility, Kitchen, Hallway, Boot Room

Most of our utility-room quotes are part of a wider whole-ground-floor specification. The same plank running from the hallway through the kitchen into the utility into the back door is the look almost every modern open-plan house wants and LVT is the only product that lets you do it without compromise on any one room. Pick the spec for the hardest-working room (the utility) and run it through everywhere else.

Explore Related Categories

How to Buy or Get a Quote

GF LVT is available to buy online with full pricing displayed and up to 5 free samples per order. Amtico, Karndean, Invictus and Project Floors are sold on a Request a Price basis – get in touch via our enquiry form, WhatsApp or phone with the range you have shortlisted, a rough room measurement and any competitor quote you have already received and we will come back the same working day with a tailored, competitive price. Supply-and-fit is available across Cheshire and South Manchester from our 24/7 smart-lock Altrincham showroom.


FREE DELIVERY
FREE DELIVERY
FREE DELIVERY
Price range: £16.99 through £24.99inc VAT
FREE DELIVERY
£15.99inc VAT
FREE DELIVERY
FREE DELIVERY
FREE DELIVERY
£16.99inc VAT
FREE DELIVERY
FREE DELIVERY
Price range: £16.99 through £24.99inc VAT
FREE DELIVERY
Price range: £16.99 through £24.99inc VAT
FREE DELIVERY
FREE DELIVERY
£26.99inc VAT
FREE DELIVERY
£24.99inc VAT
FREE DELIVERY
FREE DELIVERY
FREE DELIVERY
£24.99inc VAT
FREE DELIVERY
FREE DELIVERY
Price range: £18.99 through £26.99inc VAT
FREE DELIVERY
FREE DELIVERY
FREE DELIVERY
£16.99inc VAT
FREE DELIVERY
FREE DELIVERY

Frequently Asked Questions

Is LVT waterproof for a utility room?

Yes, for utility use LVT is effectively waterproof. The vinyl plank has no wood content so it does not absorb water and a glue-down floor bonded to the subfloor and sealed at the perimeter keeps mop water, appliance leaks and wet boots out of the floor edge. It is the format we specify for wet rooms over any floating click floor.

What wear layer do I need for a utility room?

Step up from the standard 0.3mm. A 0.55mm wear layer (Karndean Van Gogh or Amtico Spacia) is the sweet spot for a typical family utility and 0.7mm (Karndean Art Select, Amtico Form or Invictus Ultimus) is better if it doubles as a boot room, dog-washing zone or the family route to the garden. The room is small, so the extra cost is tiny.

Can LVT withstand the weight and vibrations of a washing machine?

Yes. A glue-down LVT floor is bonded continuously to the subfloor, so it handles the point loads of a fully loaded washer-dryer without indenting far better than a floating floor. A flat subfloor is essential, because a washing machine on a hump will walk on a fast spin and felt pads or an anti-vibration mat under the appliance help further.

How does LVT compare to ceramic tiles for a utility room?

LVT is warmer and quieter underfoot than ceramic, will not crack if you drop a pan or a tin, needs no grout to clean and is more forgiving on a flexing timber subfloor. It matches tile on waterproofing while being cheaper to fit and easier to repair, which is why it is our default recommendation for a utility.

Should utility room LVT be glue-down or click?

Glue-down, in almost every case. A bonded floor has no perimeter expansion gap or joints for water to creep into and it copes with washing-machine point loads better than a floating raft. Click LVT is only an exception where the existing floor cannot be lifted and then the perimeter must be sealed carefully at every doorway and appliance recess.

We aim to reply with the lowest priced quote in the UK within 12 hours

  • Quotes are valid for 24 hours, unless otherwise agreed
  • We encourage customers to request prices when ready purchase