Woodlands Forest LVT by the Pallet

Woodlands Forest LVT is supplied at trade per-square-metre rates with a minimum order requirement of half a pallet.

What is Woodlands Forest LVT?

Woodlands Forest is the darker tonal palette within the Woodlands LVT range. Decor names draw from UK forests like Kielder, Cragside and Gisburn and the design language reads as natural-warm through to darker-smoked woodland tones. The palette sits at the warmer end of the wood-effect spectrum and is built for interiors where a richer floor adds atmosphere rather than retreating into the background.

Spec is straightforward: 2.5mm total thickness with a 0.55mm wear layer in a glue-down format. Class 23 domestic durability covers full-property residential fitouts including kitchens and bathrooms over a properly prepared subfloor. The 0.55mm wear layer puts Forest in the same durability bracket as many higher-priced ranges at retail box rates.

The range covers two format options under the same 8-decor library. Forest Plank gives a continuous-run wood-look install suited to open-plan layouts. Forest Herringbone gives a feature-floor install suited to hallways, kitchens and period-property reception rooms. Specifying the same decor in both formats keeps colour and grain coherent if a project mixes formats across rooms.

The 8 Forest decors

The Forest palette splits across three tonal bands. The mid-warm woodland tones cover Dalby, Epping, Friston and Rivington which sit at the heart of the range and suit most living and circulation spaces. Yarncliffe is a slightly cooler mid-tone with a touch more grey for buyers wanting warmth without going gold. The darker forest end covers Kielder, Cragside and Gisburn which suit feature floors, period properties and rooms where a richer floor is the design lead. All 8 decors are available in both Plank and Herringbone formats.

Plank versus Herringbone within the Forest range

Format choice within Forest is a design decision rather than a spec one. Plank gives long boards laid in a continuous run and is the right choice for open-plan spaces, lounges and bedrooms where the floor reads as wood. Herringbone gives smaller blocks laid in the classic pattern and is the right choice for entrance halls, kitchens and feature rooms where the floor reads as parquet. Both formats use the same decor library so a Plank lounge in Kielder pairs cleanly with a Herringbone hallway in Kielder.

Where Woodlands Forest sits within the value tier

Position honestly: Forest is a value-tier LVT palette with the spec to handle full-property installs. The 0.55mm wear layer is the same wear layer used on many higher-priced premium-brand glue-down ranges and the 2.5mm thickness gives a stable lay over properly prepared subfloors. The UK-forest decor naming gives the range a stronger design narrative than is usual at this price point, which is helpful where a buyer wants a coherent visual story across multiple rooms.

Minimum order: half a pallet

Each Forest product page shows the per-square-metre rate, the half-pallet minimum coverage in square metres and the full per-pallet figure. Customers commit to at least a half-pallet quantity and add additional boxes from the same product page to match a project’s exact square-metre requirement. The wholesale-tier per-square-metre rate applies at half pallet, at full pallet and at any quantity in between. Single-room buyers needing a smaller quantity should look at our box-rate retail ranges instead.

What you get with every order

Free UK kerbside delivery on a tail-lift pallet direct to the delivery address as a single drop. Supplied to order in roughly 3 to 5 working days. Single-batch consistency across every box on the pallet so colour and grain stay clean across the install. Forklift offload is available where the receiving site has a forklift available.

Suitability and where to use it

Woodlands Forest is suited to full-property residential fitouts, buy-to-let reflooring, period-property refurbs and light-commercial settings where a warmer wood look is the design intent. The 0.55mm wear layer with proper subfloor preparation handles bedrooms, lounges, kitchens, hallways and bathrooms. Forest particularly suits properties where the existing interior leans warm or where the floor needs to add atmosphere.

Where to buy Woodlands Forest LVT in the UK

Grosvenor Flooring supplies Woodlands Forest UK-wide through a national pallet network with per-square-metre pricing published openly on every product page. Visit our showroom in Altrincham (Cheshire) to discuss Forest specification with a member of our team or place a pallet order online for kerbside delivery direct to your site or address.

Key takeaways

Woodlands Forest is the darker tonal palette within the Woodlands LVT range, 8 decors across Plank and Herringbone formats
2.5mm thickness with a 0.55mm wear layer suited to full-property residential installs and light commercial
UK-forest decor naming gives the range a coherent design narrative from mid-warm to darker-smoked tones
Same 8 decors available in Plank or Herringbone so projects can mix formats across rooms in matching decor
Minimum order is half a pallet per design with per-square-metre pricing published openly on every product page

Frequently Asked Questions

What is the minimum order on Woodlands Forest LVT?

The minimum order on Woodlands Forest is half a pallet per design. Each product page shows the half-pallet coverage in square metres alongside the per-square-metre rate and the full per-pallet figure. Customers commit to the half-pallet minimum and can add additional boxes to match a project's exact square-metre requirement.

What is the difference between Woodlands Forest and Woodlands Nature?

Woodlands Forest and Woodlands Nature are the two tonal palettes within the Woodlands LVT range. Forest covers the warmer and darker end of the wood-effect spectrum with UK-forest decor names like Kielder, Cragside and Gisburn. Nature covers the lighter and more natural end with UK nature-reserve decor names like Pensthorpe, Minsmere and Attenborough. Both palettes use the same 2.5mm thickness and 0.55mm wear layer.

What formats are available in Woodlands Forest?

Woodlands Forest is available in two formats. Forest Plank gives a continuous-run wood-look install suited to open-plan rooms and bedrooms. Forest Herringbone gives a feature-floor install suited to hallways, kitchens and reception rooms. All 8 Forest decors are available in both formats so projects can mix formats across rooms in matching decor.

How long does Woodlands Forest LVT delivery take?

Woodlands Forest is supplied to order with a typical lead time of 3 to 5 working days from order to delivery. The specific lead time for each product is shown on the listing. Delivery is free kerbside on a tail-lift pallet direct to the delivery address.

Is Woodlands Forest LVT completely waterproof?

Yes, Woodlands Forest LVT is constructed from materials that are inherently 100% waterproof. This makes it an excellent choice for areas prone to moisture and spills, such as kitchens, bathrooms, utility rooms, and entrance halls, as it won't swell, warp, or stain due to water exposure when properly installed.

How realistic are the wood effects in the Woodlands Forest range?

The Woodlands Forest LVT range utilises advanced high-definition printing technology and often features embossed-in-register (EIR) textures. This means the surface texture perfectly matches the underlying wood grain pattern, resulting in incredibly realistic planks that closely mimic the look and feel of natural timber.

Is Woodlands Forest LVT suitable for homes with pets or children?

Absolutely. Woodlands Forest LVT is designed for durability. Its tough wear layer provides excellent resistance against scratches (from pet claws or toys), scuffs, and stains. Furthermore, its easy-to-clean surface makes dealing with spills, mud, or accidents straightforward, making it a very practical choice for busy family homes.

Can I install Woodlands Forest LVT with underfloor heating?

Yes, Woodlands Forest LVT is generally compatible with most types of embedded water-based underfloor heating systems. It's crucial to adhere to the specific installation guidelines and ensure the surface temperature does not exceed the manufacturer's recommendation, typically around 27°C, to maintain the floor's integrity and warranty.