Aspire LVT by the Pallet

Aspire LVT is supplied at trade per-square-metre rates with a minimum order requirement of half a pallet.

What is Aspire LVT?

Aspire is a value-tier UK LVT brand built around a single coherent range called Aspire Elite. The format is glue-down plank, which means each board is bonded down onto a prepared subfloor rather than clicked together as a floating system. Glue-down is the format the trade picks for whole-property fitouts because it lays flat under furniture loads and absorbs minor subfloor imperfections in a way that click systems do not. Aspire Elite focuses on wood-effect oak decors in a single visual language designed to run across an entire property without a jarring tonal switch from room to room.

On spec the range is 2.5mm total thickness with a 0.55mm wear layer. That 0.55mm wear layer is the spec figure that matters most for project-scale buyers because it puts Aspire in the same durability bracket used for high-traffic residential and light commercial work. Aspire Elite carries the durability class needed for full domestic use including bedrooms lounges kitchens hallways and bathrooms and is appropriate for rental turnover work and light-commercial environments such as small offices and treatment rooms where footfall is steady but not industrial.

The range covers 10 oak-effect decors arranged so a specifier can pick a single tone for a whole property or run two complementary tones across living and sleeping spaces without breaking the visual flow. Plank format is the right pick for open-plan layouts and continuous-run installs because long boards make a room read larger and the eye picks up fewer joins. Each pallet is supplied as a single batch so colour and emboss are consistent across every box you lay.

The Aspire Elite range

The 10 decors fall into three tonal bands. Natural Oak and Classical Oak sit at the light end with clean warm grain and minimal contrast for bright open-plan spaces. Bleached Oak is the palest board in the range and reads almost off-white in daylight which suits coastal and Scandi-inspired schemes. Country Oak and Warm Oak are the mid-warm choices with honeyed undertones that flatter most paint palettes. Artisan Oak and Smithy Oak are mid-warm with more character in the grain so they handle busier rooms where the floor needs to absorb visual noise. Fossil Oak is a pale grey-brown that bridges cool and warm schemes. Charred Oak and Smokehouse Oak close out the range at the dark end with smoked tones for statement living rooms and contrast-led interiors. Planks are approximately 1219mm by 178mm which is the standard premium-LVT plank format and works well in both small and large rooms.

Where Aspire sits within the value tier

Aspire is honestly a mid-residential value LVT brand with the spec needed for full-property installs. The 0.55mm wear layer puts it on level terms with ranges that carry premium price tags and the glue-down construction means it behaves the way the trade expects a project LVT to behave on site. You are not buying a budget click product dressed up as a project floor. You are buying a proper glue-down LVT at a per-square-metre rate that reflects pallet-quantity economics rather than single-room retail pricing.

Minimum order: half a pallet

Each Aspire product card carries the per-square-metre rate the half-pallet minimum coverage in square metres and the full per-pallet coverage figure. Customers commit to at least half a pallet per design and can add additional boxes on top to match a project’s exact square-metre requirement. The wholesale-tier per-square-metre rate applies at the half-pallet level at the full-pallet level and at any quantity in between so you are not penalised for buying the smaller commitment. Half a pallet is enough to floor a small flat or one floor of a typical three-bedroom house in a single design. Single-room buyers should look at our box-rate retail LVT ranges instead because pallet logistics are not built for two-box orders.

What you get with every order

Free UK kerbside delivery on a tail-lift pallet direct to the address you nominate. Single drop from a national pallet network so you know when the lorry is coming and can plan offload accordingly. Supplied to order in roughly 3 to 5 working days from order placement and payment clearance. Single-batch consistency across every box on the pallet so the floor you lay is consistent end to end. Forklift offload available where the receiving site has a forklift on site which is the cleanest option for new-build plots and trade premises.

Suitability and where to use it

Aspire Elite is the right pick for residential whole-property fitouts buy-to-let reflooring light commercial work and rental-property turnover jobs. The 0.55mm wear layer paired with the right underlay handles bedrooms lounges kitchens hallways and bathrooms without complaint. Glue-down plank format suits open-plan layouts and continuous-run installs where you want one floor reading across multiple zones rather than a break at every doorway. For commercial use it is appropriate for offices treatment rooms small retail and other light-traffic environments. For heavy commercial work step up to a 0.7mm wear layer range.

Where to buy Aspire LVT in the UK

Grosvenor Flooring supplies Aspire UK-wide through a national pallet network with per-square-metre pricing published openly on every product page. Visit our showroom in Altrincham (Cheshire) to discuss specification with a member of the team or place a pallet order online for kerbside delivery direct to your site or address. Trade buyers and developers running multiple plots can place repeat pallet orders through the same online checkout without quote-form friction.

Key takeaways

Aspire Elite LVT is a value-tier glue-down plank range with a 0.55mm wear layer and 2.5mm total thickness
10 oak decors covering light mid and dark tones in a single coherent design language
Minimum order is half a pallet per design with per-square-metre pricing published openly on every product page
Free UK kerbside pallet delivery in roughly 3 to 5 working days supplied to order

Frequently Asked Questions

What is the minimum order on Aspire LVT?

The minimum order on Aspire LVT is half a pallet per design. Each product card shows the per-square-metre rate the half-pallet coverage in square metres and the full per-pallet coverage figure so you can size the order to your project before checkout. You can commit to half a pallet take a full pallet or add additional boxes on top of a half pallet to match your exact square-metre requirement. The same wholesale-tier per-square-metre rate applies across every commitment size. Single-room buyers who need only two or three boxes should look at our box-rate retail LVT ranges instead.

What is the Aspire Elite LVT range?

Aspire Elite is the single range we stock from the Aspire brand. It is a glue-down plank LVT in 10 oak-effect decors covering light mid and dark tones in one coherent visual language. The range is built so a specifier can floor a whole property in a single design or run two complementary tones across the property without a jarring tonal break between rooms. Spec is 2.5mm total thickness with a 0.55mm wear layer which is the durability bracket used for high-traffic residential and light commercial work. Planks are approximately 1219mm by 178mm.

What is the wear layer on Aspire LVT?

The wear layer on Aspire Elite LVT is 0.55mm. The wear layer is the transparent vinyl top layer that protects the printed design from scuffs scratches and surface wear and it is the single most important spec figure when judging an LVT's durability. A 0.55mm wear layer is appropriate for all domestic rooms including high-traffic areas such as kitchens and hallways and for light-commercial environments such as small offices and treatment rooms. For heavy commercial use such as retail or hospitality step up to a 0.7mm wear layer range from our wider LVT selection.

Is Aspire LVT suitable for kitchens and bathrooms?

Yes Aspire Elite LVT is suitable for kitchens and bathrooms. LVT is a 100 percent waterproof product by construction which makes it one of the few hard-floor materials genuinely appropriate for wet areas in the home. In a kitchen the 0.55mm wear layer copes with chair drag dropped utensils and the steady footfall that kitchens see. In a bathroom we recommend a glue-down install with sealed perimeter joints to keep splash water from finding its way under the floor. Aspire glue-down planks suit both rooms without spec compromise.

Is Aspire LVT suitable for rental properties?

Yes Aspire is one of the strongest picks in our range for rental-property work. The 0.55mm wear layer handles tenancy turnover wear at a per-square-metre rate that fits a landlord budget and the glue-down plank format is easier to spot-repair than a click floor if a single board takes damage during a tenancy. Buying by the pallet means you can floor a whole flat or a multi-room HMO in a single batch and keep a few spare boxes on hand for future repairs without worrying about decor obsolescence between tenancies.

How long does Aspire LVT delivery take?

Aspire LVT is supplied to order on a UK pallet network and typically arrives in roughly 3 to 5 working days from order placement and payment clearance. Delivery is free UK kerbside on a tail-lift pallet direct to the address you nominate at checkout. Single drop from the pallet network means you get a delivery window and can plan offload accordingly. Forklift offload is available where the receiving site has a forklift on site which is the cleanest option for new-build plots commercial premises and trade yards.

How is Aspire LVT priced?

Aspire LVT is priced at a per-square-metre rate published openly on every product card with no quote form to fill in and no trade-account paperwork to complete. The wholesale-tier rate reflects pallet-quantity economics rather than single-room retail pricing so you pay the trade rate from your first half pallet upward. Each product card also shows the half-pallet coverage in square metres and the full per-pallet coverage figure so you can size your commitment to the project. For exact current figures see the individual Aspire Elite product pages.

How is Aspire LVT installed?

Aspire Elite LVT is a glue-down plank product which means each board is bonded down onto a prepared subfloor using a flooring-grade adhesive. The subfloor needs to be flat clean dry and free from loose material before installation begins and a self-levelling compound is often the right first step on older concrete or unevenly laid plywood. Glue-down lays flat under furniture loads and absorbs minor subfloor imperfections in a way click-system floors do not. We recommend a qualified flooring fitter for whole-property glue-down installs and our Altrincham team can quote installation locally.