Trustindex - Excellent Rating, 4.8 Stars, 192 Reviews

Buying Guides · 8 min read

Karndean Knight Tile Alternative: A Tougher GF Floor for Each Design

Published 24 October 2026 · Updated 5 November 2026

Adam WilliamsReviewed by our team, led by Adam Williams, Managing Director

Knight Tile is Karndean’s entry range. It keeps the Karndean name and its design style at a lower price by using a thinner 0.3mm wear layer. That makes our comparison here unusual. For most Karndean Knight Tile and Knight Tile Rigid Core designs, the nearest floor from our own brand, GF by Grosvenor Flooring, has a thicker wear layer than the Karndean it replaces. We supply and fit both Knight Tile ranges, so here is the honest side-by-side for all 36 Knight Tile woods on our site.

Karndean Alternative – 5 LVT Ranges That Match the Look for Less

Knight Tile and GF: The Main Points

Glue-down Knight Tile has a 0.3mm wear layer. Its GF matches are glue-down at 0.55mm, or 0.7mm for two herringbones, so you step up in durability.
Knight Tile Rigid Core is the click version, also at 0.3mm. Four of its designs match GF Click SPC at 0.5mm and three match GF by Associated Weavers Click SPC at 0.3mm.
We rate 6 pairings very close, 25 a similar look and 5 a colour match.
Knight Tile Grey Limed Oak Herringbone, which draws the most Knight Tile searches to our site, is closest to GF Glue-Down Coniston Ash Herringbone.
Check any Knight Tile design in Floor Finder and it gives the same answer as this page and the We Recommend box on the product page.

Why the Wear Layer Matters Here

The wear layer is the clear top coat that takes the scuffs, grit and chair legs. At 0.3mm, Knight Tile copes with everyday use in any room, but kitchens, hallways and homes with dogs give a wear layer the hardest time, so extra thickness there buys more margin. Because GF’s glue-down floors start at 0.55mm, swapping a Knight Tile design for its GF match usually gives you a tougher surface rather than a weaker one. GF is also 100% waterproof and its price is shown on every product page.

How the Fittings Line Up

Glue-down is matched to glue-down and click to click, so your fitter’s method stays the same. Two of our guides go deeper: GF Glue-Down LVT vs Karndean for the glue-down ranges and GF SPC vs Karndean Rigid Core for the click ranges. The Karndean Knight Tile guide covers Knight Tile’s own designs and sizes.

Karndean Knight TileGF glue-down matchKnight Tile Rigid CoreGF click match
FittingGlue-downGlue-downRigid-core clickRigid-core click
Wear layer0.3mm0.55mm0.3mm0.5mm (GF Click SPC) or 0.3mm (GF by AW Click SPC)
Thickness2mm2mm or 2.5mm4.5mm5mm or 6.5mm (GF Click SPC)

Glue-Down Knight Tile and Its GF Partners

The 29 glue-down Knight Tile woods are listed alphabetically, each beside its nearest glue-down GF floor. Notice how the GF wear layer column sits above Knight Tile’s 0.3mm throughout.

Karndean Knight Tile designClosest GF designGF fittingGF wear layerHow close
Karndean Knight Tile Aged OakGF Glue-Down Buttermere OakGlue-down0.55mmSimilar look
Karndean Knight Tile Classic Limed OakGF Glue-Down Grange OakGlue-down0.55mmSimilar look
Karndean Knight Tile Coastline OakGF by AW Devonshire OakGlue-down0.55mmSimilar look
Karndean Knight Tile Dutch Limed OakGF by AW Nevis OakGlue-down0.55mmSimilar look
Karndean Knight Tile Dutch Limed Oak HerringboneGF Glue-Down Grasmere Oak HerringboneGlue-down0.55mmVery close match
Karndean Knight Tile Grey Limed OakGF by AW Nevis OakGlue-down0.55mmSimilar look
Karndean Knight Tile Grey Limed Oak HerringboneGF Glue-Down Coniston Ash HerringboneGlue-down0.55mmSimilar look
Karndean Knight Tile Grey Studio OakGF Glue-Down Coniston AshGlue-down0.55mmSimilar colour
Karndean Knight Tile Honey Limed OakGF by AW Fife OakGlue-down0.55mmSimilar look
Karndean Knight Tile Honey Limed Oak HerringboneGF Glue-Down Braithwaite Golden Oak HerringboneGlue-down0.7mmSimilar look
Karndean Knight Tile Light Worn OakGF Glue-Down Coniston AshGlue-down0.55mmVery close match
Karndean Knight Tile Lime Washed OakGF by AW Inverlochy OakGlue-down0.55mmSimilar look
Karndean Knight Tile Lime Washed Oak HerringboneGF Glue-Down Coniston Ash HerringboneGlue-down0.55mmVery close match
Karndean Knight Tile Mid Limed OakGF Glue-Down Langdale Heritage OakGlue-down0.55mmSimilar look
Karndean Knight Tile Mid Worn OakGF Glue-Down Langdale Heritage OakGlue-down0.55mmSimilar look
Karndean Knight Tile Natural Character OakGF Glue-Down Windermere Rustic OakGlue-down0.55mmSimilar look
Karndean Knight Tile Natural Studio OakGF by AW Lomond OakGlue-down0.55mmSimilar look
Karndean Knight Tile Nordic Limed OakGF by AW Ardverikie OakGlue-down0.55mmSimilar colour
Karndean Knight Tile Pale Limed OakGF by AW Inverlochy OakGlue-down0.55mmSimilar look
Karndean Knight Tile Pale Limed Oak HerringboneGF Glue-Down Langdale Heritage Oak HerringboneGlue-down0.55mmSimilar look
Karndean Knight Tile Quayside OakGF Glue-Down Langdale Heritage OakGlue-down0.55mmSimilar colour
Karndean Knight Tile Rose Washed OakGF by AW Inverlochy OakGlue-down0.55mmSimilar look
Karndean Knight Tile Rose Washed Oak HerringboneGF Glue-Down Coniston Ash HerringboneGlue-down0.55mmSimilar look
Karndean Knight Tile Traditional Character OakGF Glue-Down Ambleside Smoked OakGlue-down0.55mmSimilar look
Karndean Knight Tile Traditional Character Oak HerringboneGF Glue-Down Braithwaite Golden Oak HerringboneGlue-down0.7mmSimilar look
Karndean Knight Tile Washed Character OakGF Glue-Down Windermere Rustic OakGlue-down0.55mmSimilar look
Karndean Knight Tile Washed Character Oak HerringboneGF Glue-Down Windermere Rustic Oak HerringboneGlue-down0.55mmVery close match
Karndean Knight Tile Washed Scandi PineGF by AW Nevis OakGlue-down0.55mmSimilar colour
Karndean Knight Tile White Painted OakGF by AW Nevis OakGlue-down0.55mmSimilar colour

Knight Tile Rigid Core and Its GF Click Partners

The seven Rigid Core woods are paired with GF click floors. Each GF floor has its underlay attached, as Rigid Core does.

The last column tells you how much to trust a pairing. Very close match and Similar look passed a side-by-side photo check. Similar colour is a GF floor chosen for tone because nothing passed that check. For those, compare two or three GF samples before choosing.

A Short List of GF Samples to Order

Knight Tile’s matches are spread across many GF floors, so there is no single dominant answer. These six come up most often. Nevis Oak from GF by AW leads with four Knight Tile designs. Coniston Ash Herringbone, Inverlochy Oak and Langdale Heritage Oak each match three. Coniston Ash and Braithwaite Golden Oak Herringbone match two apiece.

Sizes and specifications for these and the rest of GF are on the GF Flooring website: see GF by AW, Glue Down LVT and Click SPC.

Stone-Effect Knight Tile

Knight Tile’s stone and slate designs are left out of the tables. Floor Finder handles them: pick “I have seen a floor I like”, enter the Knight Tile name and it returns the nearest GF tile in the same fitting. If GF has nothing close, it will tell you.

Seeing It on Your Own Floor

Get a free GF sample and leave it where the floor is going for a day or two. Knight Tile is often chosen for bedrooms and spare rooms, where lighting is softer, so check it with the curtains open and closed. Both ranges are on show in our Altrincham showroom too.

Is Knight Tile Ever the Better Choice?

Yes, when one Knight Tile design is exactly what you want or when a specification asks for Karndean. For a quiet bedroom, its 0.3mm wear layer is perfectly adequate. We supply and fit both Knight Tile ranges. To compare GF with Van Gogh, Art Select and the rest of Karndean, use our Karndean alternative guide.

Come and See Both

The Altrincham Smart Showroom opens 24 hours a day. Ask for a door code on our website and visit at a time that suits you. There is no need to book. Knight Tile and GF are both on display. For directions and parking, see where to buy Karndean in Altrincham.

Adam Williams, Managing Director of Grosvenor Flooring

Who leads our guides

Adam Williams

Managing Director, Grosvenor Flooring

Adam Williams is Managing Director of Grosvenor Flooring in Altrincham. He sets the standards our guides are written to and guides the team that reviews them, so the advice matches the floors we supply, the manufacturers' specifications and the way the fitters we work with install them.

More about Adam →

Floor Finder

Not sure which floor to choose?

Answer a few quick questions about your room, who uses it and the look you like. Floor Finder picks the designs that suit you best, with prices per m² and a rough cost for your room.

Start Floor Finder

Frequently Asked Questions

What do you recommend over Karndean Knight Tile?

For glue-down Knight Tile, our GF by Associated Weavers or GF Glue-Down LVT, which give you a thicker 0.55mm wear layer or more. For Knight Tile Rigid Core, GF Click SPC.

Grey Limed Oak Herringbone is my favourite Knight Tile. Which GF floor is nearest?

GF Glue-Down Coniston Ash Herringbone is the nearest, rated a similar look. Its 0.55mm wear layer is tougher than Knight Tile’s 0.3mm.

Which GF floor matches Knight Tile Grey Limed Oak?

GF by AW Nevis Oak, a similar look, glued down with a 0.55mm wear layer.

What is the GF click floor closest to Knight Tile Rigid Core Lime Washed Oak?

GF by AW Click SPC Kintail Oak. It is a similar look with the same 0.3mm wear layer.

What replaces Knight Tile Rigid Core Washed Character Oak?

GF Click SPC Daylesford Oak, which we rate a similar look. At 0.5mm its wear layer is tougher than the Rigid Core’s 0.3mm.

Is GF Click SPC a fair swap for Knight Tile Rigid Core?

Yes. It is a rigid-core click floor with a built-in underlay and a 0.5mm wear layer. Some Rigid Core designs match better to GF by Associated Weavers Click SPC at 0.3mm, as the second table shows.

Will GF stand up to a hallway?

GF at 0.55mm or 0.7mm is a good hallway floor and it is fully waterproof, so wet shoes and mopping do it no harm.

Can I still order Knight Tile from you?

Yes, both Knight Tile and Knight Tile Rigid Core, supplied and fitted.

Further Reading